UL 277v 0-10v dimmable led driver 12v 150w slim power supply
SMT-012-150VDSW is UL led driver dimmable super slim 150w. it has widely input voltage range 110-277Vac and 42-60Hz for north american market and european market. output voltage is 12Vdc. it is waterproof IP67 version, aluminum case. can be used at indoor and outdoor projects. it is compatible with jaylumi's GPC9510.
product parameters
model | SMT-012-150VDSW | SMT-024-150VDSW | ||
output | dc voltage | 12VDC | 24VDC | |
voltage accuracy | ±5% | ±5% | ||
rated current | 12.5Amp | 6.25Amp | ||
rated power | 150 w | 150W | ||
voltage regulation | ± 0.5% | |||
load regulation | ± 1% ± 1% | |||
input | voltage range | 10 0- 277 v ac | ||
frequency range | 47 ～ 63HZ | |||
power factor ( Typ. ） | PF≧0.9 9 /110V ; PF≧0.9 5 /2 77 v | |||
THD( Typ . ) @ full load | < 10 % @120VAC <15%@277VAC | |||
full load efficiency （ Typ. ） | 84 % @120VAC, 86%@277VAC | 85 % @120VAC, 88%@277VAC | ||
ac current （ Typ. ） | 1. 4 0 a | |||
inrush current （ Typ. ） | 11A,50%,1.04ms@110V, 27A,50%,960us@277V | |||
leakage current | <0. 50 ma | |||
protection | short circuit | hiccup mode, recovers automatically after fault condition is removed. | ||
over loading | ≤120% shut down o/p voltage, re-power on to recover | |||
over temperature | 100℃±10℃ shut down o/p voltage, automatically recoverafter cooling. | |||
environment | working TEMP. | -40 ～ +60℃ | ||
working humidity | 20 ～ 9 5 %RH,non-condensing | |||
storage TEM.,Humidity | -40 ～ +80℃ ， 10 ～ 95%RH | |||
TEMP.coefficient | ±0.03%/℃ （ 0 ～ 50℃ ） | |||
vibration | 10 ～ 500Hz, 5 g 10min./1 cycle,period for 60min. each along X,Y,Z axes | |||
Safety&EMC | safety standards | UL8750 ,CAN/CSA-C22.2 No.250.13 | ||
withstand voltage | I/P-O/P: 1.88 KVAC | |||
isolation resistance | I/P-O/P ： 100MΩ/500VDC/25℃/70%RH | |||
EMC emission | fcc 47 CFR part 15 ,Subpart b | |||
EMC immunity | compliance to EN61000-4-2,3,4,5,6,,11, , alight industry level | |||
Others | weight | 0.65 kg | ||
size | 330*32*23 mm (L*W*H) | |||
packing | 375*27*17.5mmmm , 30 PCS/CTN | |||
notes | 1. all parameters not specially mentioned are measured at 110VAC, 2 77 vac input , ratedload and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC directive on the complete installation again. | |||
 |  |  |  |
CompatibleDimmer type
SMT50-D2 is 0-10v ce dimmer . input interface is AC100-265V input, it is supply power for the controller it takes. its output interface is DC0-10V output can control led 0/1-10V dim led driver. it is dimming well with gkoled's GKOWP08/01.
related products
 it is UL fcc listed 12v 60w 0-10v dimmable led driver . it is driver with junction box in one case can be used at wet, dry, damp location. Mode：SMT-012-060VDHV2 |
