Controlador led regulable dali-2 de voltaje constante 100-277VAC 24v 96w a la venta

Controlador led regulable dali-2 de voltaje constante 100-277VAC 24v 96w a la venta

Controlador LED de voltaje constante regulable DALI-2 y PUSH de 24v 96W con función PFC activa incorporada, eficiencia de trabajo de hasta 90%. Modo de salida PWM, adecuado para la instalación de proyectos de iluminación LED inteligente en interiores y exteriores.

  Especificación 

  Especificaciones mecánicas   

※Input & Output wiring 
※Input electronic cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);
※Output : 12V electronic cable 5*16AWG to be connected to LED Light;  
          24V electronic cable 5*18AWG to be connected to LED Light;  

※Dimming cable   
※Dimming electronic cable  2*18AWG, Pink DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.
Pink (N) is connected to AC (N) while Purple (L) and pink (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
RGBW dimming: electronic cable, Black is output ( V+) Positive, Red (R-), Green(G-), Blue (B-), White(W-) are output (V-) negative

Note:  there is external antenna at output side.  Don't disassemble!

  Dimming operation    

Diagram 1:   DALI-2 dimming with DALI power and dimmer：

Diagram2:  DALI-2 dimming with DALI system and DALI bus：

※Note: For DALI Dimming Wiring Diagram 2, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power. 

  DALI-2 address setting Operation  

※The default address for the DALI-2 LED driver is 001.

※Address settings device:

※Address settings:

① RDM setting address:

Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.   

② NFC setting address:

The DALI-2 led drivers’ address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

■ Adjust output voltage Operation

※Adjust output voltage slightly for DALI-2 LED drivers

1) The driver output voltage can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 1.

■ ¿ Cómo configurar la dirección del controlador LED CV DALI-2 mediante la aplicación NFC o el dispositivo NFC?

Operación simple para restablecer la dirección del controlador LED DALI-2 y ajustar el voltaje de salida mediante un teléfono móvil con una aplicación NFC  (configurar NFC)  o un dispositivo portátil NFC (dispositivo de lectura y escritura NFC : NFC-RW) 

  Productos relacionados